home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 25
/
Cream of the Crop 25.iso
/
bbs
/
kpv31r2.zip
/
MULTI.ZIP
/
KPVOTE4.CFG
< prev
next >
Wrap
Text File
|
1996-09-27
|
10KB
|
224 lines
; KPVOTE.CFG - Sample KeWL PRoDuKsHunZ DoOr configuration file
;
;
; The information in this file is NOT usually needed, and the file can be
; left as is, or even erased, without effecting the door's performance.
; KeWL PRoDuKsHunZ DoOrZ are designed to run on almost any BBS system
; automatically, without requiring anything but to the door's .EXE file.
; However, there are many cases where the sysop may wish to customize a door's
; operation using this configuration file. The configuration file system is
; provided to allow the customization of options such as paging hours, maximum
; time permitted within the door, etc., and to allow the door to be run
; under even the most non-typical BBS setups.
;
; Any text following a semi-colon (;), and blank lines, are ignored.
;
;------------------------------------------------------------------------------
;
; BBS system directory. Indicates where the door information file (drop file)
; can be found. Remove the semi-colon (;) to activate this option.
;
BBSDir C:\wildcat\wcwork\node4
;
;------------------------------------------------------------------------------
;
; The door's working directory. This is where the door's system files are
; located. Remove the semi-colon (;) to activate this option.
;
DoorDir C:\wildcat\doors\vbooth
;
;------------------------------------------------------------------------------
;door.sys
; Local mode override. Forces door to always operate in local test mode.
; Remove the semi-colon (;) to activate this option. When this mode is
; activated, no door information file is required and default settings are
; used for the user's name, location, etc.
;
LocalMode
;
;------------------------------------------------------------------------------
;
; Log File options. "LogFileName" specifies filename (path optional) where the
; door should record log information. To disable the log file altogether,
; remove the semi-colon (;) from the "DisableLogging" line.
;
LogFileName KPVOTE.LOG
;DisableLogging
;
;------------------------------------------------------------------------------
;
; BBS node number that door is running on. Only used if the door is unable
; to determine the node number by some other means.
;
Node 4
;
;------------------------------------------------------------------------------
;
; Sysop paging hours. Sysop paging will be permitted beginning at the start
; time, up until, but not including, the end time. Times should be in 24-hour
; format. To disable paging on a particular day, set the paging start and end
; times to the same time.
;
; Start Time End Time
SundayPagingHours 9:00 22:00
MondayPagingHours 8:30 22:00
TuesdayPagingHours 8:30 22:00
WednesdayPagingHours 8:30 22:00
ThursdayPagingHours 8:30 22:00
FridayPagingHours 8:30 22:00
SaturdayPagingHours 9:00 22:00
;
;------------------------------------------------------------------------------
;
; Duration of sysop page. Value indicates the number of beeps that compose the
; sysop page alarm.
;
PageDuration 5
;
;------------------------------------------------------------------------------
;
; Maximum length of time a user is permitted to access the door. If the user's
; total remaining time on the BBS is less than this value, the user will only
; be permitted to access the door for this shorter length of time. This option
; may be disabled by placing a semi-colon (;) at the beginning of the line.
; When this option is disabled, the user will be permitted to use the full
; of their remaining time on the BBS within the door.
;
;MaximumDoorTime 15
;
;------------------------------------------------------------------------------
;
; Inactivity timeout. Specifies the maximum number of seconds that may elapse
; without the user pressing any key, before the user will be automatically
; disconnected. A value of 0 disables inactivity timeouts.
;
InactivityTimeout 200
;
;------------------------------------------------------------------------------
;
; Name of the sysop. This door can usually determine the sysop's name from the
; information passed to the door by the BBS. However, some BBS software does
; not supply this information to doors. In such cases, if the sysop's name is
; required by the door, it may be supplied here. Remove the semi-colon (;) to
; activate this option. -NOTE- This option MUST be set EXACTLY how it appears
; in the DROP FILE, or you WONT be able to use ANY sysop functions inside this
; door. If you are using a HANDLE, and it is not working, try using your real
; name, sometimes this can be triky.
;
SysopName Lawrence Cook
;
;------------------------------------------------------------------------------
;
; Name of the BBS. This door can usually determine the name of the BBS from
; the information passed to the door by the BBS. However, some BBS software
; does not supply this information to door programs. In such cases, if the
; name of the BBS is needed by the door, it may be supplied here. Remove the
; semi-colon (;) to activate this option.
;
SystemName Night Owls BBS
;
;------------------------------------------------------------------------------
;
; Door colour options. These options specify the various text colours that
; will be used by the door if ANSI or AVATAR graphics modes are available.
; Colours are specified in the format:
;
; {Bright} {Flashing} [Foreground Colour] on [Background Colour]
;
; Where foreground and background colours are one of:
;
; Black
; Blue
; Green
; Cyan
; Red
; Magenta
; Yellow / Brown
; White / Grey
;
ChatUserColour Bright white on black
ChatSysopColour magenta on black
PagePromptColour Bright white on black
;
;------------------------------------------------------------------------------
;
; Memory swapping options. These options are generally not needed, but can be
; used to customize this doors swapping behaviour. "SwappingDir" can be used
; to specify which directory or directories should be used for swapping.
; Multiple directory paths can be seperated using a semi-colon.
; "SwappingNoEMS" can be used to prevent any swapping from being done to EMS
; memory, and "SwappingDisable" can be used to disable memory swapping
; altogether. Remove the semi-colon (;) to activate any of these options.
;
;SwappingDir C:\
;SwappingNoEMS
;SwappingDisable
;
;------------------------------------------------------------------------------
;
; Serial port options. These options are generally not needed, as these
; settings can usually be determined from the BBS door information file.
; "LockedBPS" specifies the the BPS rate at which the door should communicate
; with the modem. "SerialPort" specifies the port port number that the modem
; is connected to. Unless you have reassigned the port numbers through your
; FOSSIL drive, port 0 corresponds to COM1, port 1 corresponds to COM2, and
; so on. Remove the semi-colon (;) to activate either of these options.
;
;LockedBPS 57600
;SerialPort 3
;
;
; Normally, a FOSSIL driver is used for serial I/O if one is available. If
; a FOSSIL driver has not been loaded, the door communicates directly with
; the modem. Removing the semi-colon (;) from the "NoFossil" option causes
; the door to always communicate directly with the modem, bypassing any
; FOSSIL driver.
;
;NoFossil
;
;------------------------------------------------------------------------------
;
; The following options only apply if a FOSSIL driver is NOT being used for
; serial communications. If a FOSSIL driver IS being used, these options
; are normally set on the FOSSIL driver command line.
;
; Hexidecimal address of the serial port. This address can usually be
; determined automatically for ports COM1, COM2, COM3, and COM4, and is
; normally only required for ports COM5 and higher. Remove the semi-colon
; (;) to activate this option.
;
;PortAddress 2E8
;
;
; Interrupt request line that the serial port is using. May be any IRQ line
; from 1 to 15. By default, IRQ line 4 is used for ports COM1: and COM3:,
; while IRQ line 3 is used for all other ports. Remove the semi-colon (;)
; to activate this option.
;
;PortIRQ 3
;
;
; Serial I/O buffer sizes. "ReceiveBuffer" specifies the number of bytes in
; the serial I/O receive buffer. You may want to increase this buffer size
; if you find that characters being sent from the user's modem are being lost.
; "TransmitBuffer" specifies the number of bytes in the serial I/O transmit
; buffer. You may want to increase this buffer size for improved performance
; in some multitasking environments.
;
ReceiveBuffer 4096
TransmitBuffer 2048
;
;
; UART FIFO buffers. Normally, this door will use 16550A UART FIFO buffers
; if they are available. You can prevent this door from using the FIFO
; buffers, even if they are available, by removing the semi-colon before
; the "NoFIFO" keyword. The "FIFOTriggerSize" specifies how many characters
; may be placed in the FIFO buffers before an serial I/O interrupt is
; envoked. Valid values are 1, 4, 8 and 14 bytes. The default value is 4
; bytes.
;
;NoFIFO
FIFOTriggerSize 4
;
;------------------------------------------------------------------------------